E-Formation charlyrobot V4

	Check that the line on which you are going to connect the machine is sufficiently rated, and that the earth is good. Warning! The machine must be connected to a line with a 300mA circuit-breaker.

	On table machines the machine’s general fuse (F) is located under the socket.

	Connect the machine to the main power supply. Warning! The machine and the PC must be connected to the same line.

	Disconnected! Connect the series RS232 cable to the machine.

	Then the other end to the PC

INSTALLATION

Delivery

CHARLYROBOT SA • PO box22 • F-74350 CRUSEILLES Phone: +33 (0)4 50 32 80 00 • Fax : +33 (0)4 50 44 00 41 © charlyrobot 2007